Now this is the question many tweekers will want to know. Now in order to see the CPU temprature follow the below steps :
First you will need to install lm-sensors
here are the commands that needs to be entered in the terminal (assuming you've updated and upgraded your OS before.)
sudo apt-get install lm-sensors
After you're done with the installation type the following in the terminal :
sudo sensors-detect
And you will also need to run this (Optional)
sudo service kmod start
Now when you run this, a new prompt will open and will ask you for a few questions. You'll need to answer Yes for all of them. Now finally in order to see the temprature of your CPU, type in sensors in your terminal.
sensors
Output :
brucewayne@Notebook:~$ sudo apt-get install lm-sensors
[sudo] password for brucewayne:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Suggested packages:
fancontrol read-edid i2c-tools
The following NEW packages will be installed:
lm-sensors
0 upgraded, 1 newly installed, 0 to remove and 28 not upgraded.
Need to get 85.5 kB of archives.
After this operation, 384 kB of additional disk space will be used.
Get:1 http://in.archive.ubuntu.com/ubuntu bionic/universe amd64 lm-sensors amd64 1:3.4.0-4 [85.5 kB]
Fetched 85.5 kB in 2s (41.6 kB/s)
Selecting previously unselected package lm-sensors.
(Reading database ... 234827 files and directories currently installed.)
Preparing to unpack .../lm-sensors_1%3a3.4.0-4_amd64.deb ...
Unpacking lm-sensors (1:3.4.0-4) ...
Processing triggers for ureadahead (0.100.0-20) ...
ureadahead will be reprofiled on next reboot
Setting up lm-sensors (1:3.4.0-4) ...
Created symlink /etc/systemd/system/multi-user.target.wants/lm-sensors.service → /lib/systemd/system/lm-sensors.service.
Processing triggers for systemd (237-3ubuntu10.4) ...
Processing triggers for man-db (2.8.3-2ubuntu0.1) ...
Processing triggers for ureadahead (0.100.0-20) ...
brucewayne@Notebook:~$ sudo sensors-detect
# sensors-detect revision 6284 (2015-05-31 14:00:33 +0200)
# System: Hewlett-Packard HP Pavilion 15 Notebook PC [0897100000304100000610100] (laptop)
# Board: Hewlett-Packard 2164
# Kernel: 4.15.0-34-generic x86_64
# Processor: Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz (6/69/1)
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): YES
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... No
AMD Family 16h thermal sensors... No
AMD Family 15h power sensors... No
AMD Family 16h power sensors... No
Intel digital thermal sensor... Success!
(driver `coretemp')
Intel AMB FB-DIMM thermal sensor... No
Intel 5500/5520/X58 thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): YES
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no): YES
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): YES
Found unknown SMBus adapter 8086:9c22 at 0000:00:1f.3.
Sorry, no supported PCI bus adapters found.
Next adapter: i915 gmbus ssc (i2c-0)
Do you want to scan it? (yes/NO/selectively): YES
Next adapter: i915 gmbus vga (i2c-1)
Do you want to scan it? (yes/NO/selectively): yes
Next adapter: i915 gmbus panel (i2c-2)
Do you want to scan it? (yes/NO/selectively): yes
Next adapter: i915 gmbus dpc (i2c-3)
Do you want to scan it? (yes/NO/selectively): yes
Next adapter: i915 gmbus dpb (i2c-4)
Do you want to scan it? (yes/NO/selectively): ^C
Unloading cpuid... OK
brucewayne@Notebook:~$ sudo service kmod start
brucewayne@Notebook:~$ sensors
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +46.0°C (high = +100.0°C, crit = +100.0°C)
Core 0: +45.0°C (high = +100.0°C, crit = +100.0°C)
Core 1: +42.0°C (high = +100.0°C, crit = +100.0°C)
acpitz-virtual-0
Adapter: Virtual device
temp1: +46.0°C
radeon-pci-0a00
Adapter: PCI adapter
temp1: N/A (crit = +120.0°C, hyst = +90.0°C)
No comments:
Post a Comment